TECHNICAL COMPLEMENTARY COURSES - ELECTRICAL ENGINEERING PROGRAM

Technical Complementaries (6 courses) 18 credits

Students following the regular Electrical Engineering program should take 6 courses (18 credits) from the following list, including 3 courses from one of the 5 areas of specialization. It is possible that not all the courses listed will be offered in any given year. Please refer to the up-to-date course assignments (posted on the Undergraduate Bulletin Board) before selecting any course. Permission will not be granted to take Technical Complementary courses outside the Department.

Computer Systems Technology:

• •ECSE 424B Human-Computer Interaction (P-ECSE 322)
• •ECSE 425A,B Computer Organization and Architecture (P-ECSE 322 and ECSE 323)
• •ECSE 427B Operating Systems (P-ECSE 322 or COMP 273)

Control & Automation:

• •ECSE 404A Control Systems (P-ECSE 303)
• •ECSE 412B Discrete Time Signal Processing (P-ECSE 304)
• •ECSE 426A,B Microprocessor Systems  (P-ECSE 323 and EDEC 206)

Integrated Circuits & Electronics:

• •ECSE 425A,B Computer Organization and Architecture (P-ECSE 322 and ECSE 323)
• •ECSE 431A Electronic Design (P-ECSE 323 and ECSE 330)
• •ECSE 432B Phys. Basis of Trans. Devices (P-ECSE 351,  ECSE 330 and PHYS 271)
• •ECSE 435B Mixed Signal Test Techniques (P-ECSE 304 and ECSE 334)

Photonics:

• •ECSE 423B Optical Communications 1 (P-ECSE 352;C-ECSE 305)
• •ECSE 430A Optical Communications 2 (P-ECSE 304 and ECSE 423)
• •ECSE 432B Physical Basis:  Transistor Devices (P-ECSE 330, ECSE 351 and PHYS 271)

Power Engineering:

• •ECSE 404A Control Systems (P-ECSE 303)
• •ECSE 462B Electromechanical Energy Conversion (P-ECSE 361)
• •ECSE 464B Power System Analysis 1 (P-ECSE 361)
  and three courses given by the Institute for Electrical Power Engineering:
• •ECSE 460B Appareillage electrique (P-ECSE 361)
• •ECSE 465B Power Electronic Systems (P-ECSE 334 and ECSE 361)
• •ECSE 468B Industrial Electricity (P-ECSE 361)

Telecommunications: Required Courses:

• •ECSE 411A Communications Systems 1 (P-ECSE 304 and  ECSE 305 )
• •ECSE 414A Intro. to Telecom. Networks (P-ECSE 322, ECSE 304 and ECSE 305) and any one of the following:
• •ECSE 412B Discrete Time Signal Processing (P-ECSE 304)
• •ECSE 413B Communications Systems 2 (P-ECSE 411)
• •ECSE 423B Optical Communications 1 (P-ECSE 352;C-ECSE 305)
• •ECSE 451B EM Transmission & Radiation (P-ECSE 352)

LABORATORY  COMPLEMENTARY COURSES  -  ELECTRICAL ENGINEERING PROGRAM
Laboratory Complementaries (2 Courses)  4 credits:

• •ECSE 426A,B Microprocessor Systems (P-EDEC 206 and ECSE 323)
• •ECSE 431A Electronic Design (P-ECSE 323 and ECSE 330)
• •ECSE 435B Mixed Signal Test Techniques (P-ECSE 304 and ECSE 334)
• •ECSE 485B IC Fabrication Laboratory (P-ECSE 334, EDEC 206; C-ECSE 432 or ECSE 533)
• •ECSE 486B Power Laboratory ( P- EDEC 206, ECSE 361 and ECSE 334 )
• •ECSE 487A,B Computer Architecture Laboratory (P-EDEC 206;C-ECSE 425 or ECSE 525)
• •ECSE 488B High Frequency Laboratory (P-EDEC 206 & ECSE 291; C-ECSE 451)
• •ECSE 490A,B Digital Signal Processing Lab (P-EDEC 206 & ECSE 291;C-ECSE 412 or ECSE 512)
• •ECSE 491A,B Communications Systems Lab (P-EDEC 206 & ECSE 291;C-ECSE 411 or ECSE 511)
• •ECSE 492A Optical Communications Lab (P-EDEC 206, ECSE 423 or ECSE 527)
• •ECSE 493B Control and Robotics Lab (P-EDEC 206 & ECSE 291;C-ECSE 404 or ECSE 502)

Revised May 2002